background image

DP860 Digital Two-way Radio                             Instruction Manual 

                                                                                                                                                                                           

                                                                                                                                                                                      12 

 Basic Functions  

4.1  Selecting a channel 

Each channel in your radio can be programmed to analog channel or digital channel. Under the 
Home Screen, turn the Channel Knob to select a channel. 

4.2  Receiving and answering the call 

(1) Receiving and answering to group call 
In order to receive the group call, you must set your radio as the group member (add your radio into 
the group call list).   
When the radio receive the group call, 
a.The green LED indicator lights on 

b.The group call icon 

, group alias or ID and incoming call icon 

  display on the LCD screen. 

c. Keep your mouth 3~6 inches away from the microphone; 
d. Press the PTT key to answer the call and the RED LED indicator lights on; 
e.Wait for the Talk Permit Tone to finish

if enabled*

and speak to the MIC; 

f.Release the PTT key to receive the call; 
g. After the preset time (call hang time) is over, the call is over.   

Summary of Contents for DP860

















































































Reviews: