10 / 96
CAYMAN
Version 01 - Revision 00
09/05/2017
2.4
usING thE MaNual
This Manual must be thoroughly read in its entirety before carrying out any operations on the attachment�
When in doubt regarding the proper interpretation of the instructions provided in this Manual, contact the
Manufacturer for all the necessary explanations�
This Manual must be kept with care throughout the attachment life span and must always accompany it when
transferred, for any reason, to other users�
This Manual must be kept near the attachment in a place that is easily accessible and known to all users; it
must be handled with care so as not to damage it, no pages must be removed and its contents must not be
modified in any way�
This Manual must be kept in a weatherproof place and protected from heat, humidity and corrosive agents�
2.5
CoNsultING thE MaNual
The information in the Manual is organised in:
∂ chapters
∂ sub-chapters
∂ paragraphs
∂ sub-paragraphs
and can be traced easily by consulting the Table of Contents at the beginning of the Manual�
2.5.1
Graphical conventions
The text in
bold
indicates important information�
Chapters are numbered progressively starting from 1�
The numbering of sub-chapters is structured as follows:
<chapter number><�><sub-chapter number> (example 1�1 or 2�10)�
The numbering of the paragraphs is structured as follows:
<chapter number><�><sub-chapter number><�><paragraph number> (example: 1�1�1 or 2�2�10)�
The numbering of sub-paragraphs is structured as follows:
<chapter number><�><sub-chapter number><�><paragraph number><�><sub-paragraph number>
(example: 1�1�1�1 or 2�2�2�10)�
The figures are numbered progressively starting from 1�
References to figures are indicated using the number that identifies a figure in bold (E�g�
fig. 1
) and if need be,
a letter or a number or both that identify the component described in the figure� The identification references
of the figure and of the component can also be used at the same time (E�g�
a - fig. 1
or
1 - fig. 1
or
a1 - fig.
1
or
1a - fig. 1
)�
The tables are numbered progressively starting from 1�
The references to the tables are indicated using the number that identifies the figure in bold (E�g�
tab. 1
)�
For the sake of clarity, some figures show incomplete layouts, parts of the attachment without protection
systems and/or with guards removed� However, the figures have general validity�
The attachment must always be used with the mechanical and electrical protection systems mounted and
properly working�
Summary of Contents for CAYMAN FCE II Series
Page 2: ......
Page 6: ...6 96 CAYMAN Version 01 Revision 00 09 05 2017...
Page 94: ...94 96 CAYMAN Version 01 Revision 00 09 05 2017...
Page 95: ......
