33 / 96
CAYMAN
Version 01 - Revision 00
09/05/2017
4.8
NoIsE EMIssIoN
The attachment was designed and built to reduce the sound power level at its source�
Factors which determine the exposure level which workers are subjected to include the duration
of exposure, the characteristics of the workplace and other sources of noise; in particular, the
material being demolished could generate considerable peaks of noise� The extent cannot be
established, as it can vary considerably depending on the material being processed�
the sound emission level produced by the attachment during the measurement period was < 70 db(a) and,
in any case, was less than the noise emitted by the machine.
Any abnormal noise is a sign of mechanical trouble; in this case, perform full and thorough maintenance by
referring to
“7 Maintenance instructions” on page 59
� If problems persist, contact the Manufacturer�
To ensure compliance with the noise level it is important to:
∂ periodically check the tightness of the fasteners and, if necessary, tighten or replace them;
∂ periodically lubricate the attachment components that require it;
∂ perform maintenance according to the schedule�
If the noise level exceeds 80 dB(A)
protective earmuffs
are mandatory�
4.9
othEr EMIssIoN
During operation, the machine may generate vibrations that can be transmitted to the attachment� Refer to
the machine manual�
4.10
CoNsuMablEs
The Customer must procure the following consumable materials, if required by maintenance operations:
∂ lubricants;
∂ all the parts subject to wear�
the Manufacturer will not be held liable for damage to persons, animals or objects caused by
use of materials other than those indicated.
4.11
produCtIoN aNd ElIMINatIoN of wastE MatErIals
Special waste, such as used oil, may be produced during attachment maintenance� All special waste must be
disposed of in compliance with regulations in force in the Country where the attachment is installed and used�
Elimination of special waste is the responsibility of the Manager who must contact Firms
authorised and specialised in processing and disposing of special waste�
do not
throw away waste materials, especially spent oil and lubricating grease and ancillary
material used for cleaning (for example cloths) in sewers (through sinks, tanks, etc�) or in the
environment (in streams or on the ground)�
These products and materials must be collected in specific containers and stored to be delivered
to authorised Collection Centres�
Summary of Contents for CAYMAN FCE II Series
Page 2: ......
Page 6: ...6 96 CAYMAN Version 01 Revision 00 09 05 2017...
Page 94: ...94 96 CAYMAN Version 01 Revision 00 09 05 2017...
Page 95: ......
