34 / 96
CAYMAN
Version 01 - Revision 00
09/05/2017
4.12
ENVIroNMENtal CoNdItIoNs rEquIrEd for opEratIoN
The attachment is designed and built to operate in environments with temperatures ranging between -20°C
and +40°C�
4.13
ENVIroNMENtal CoNdItIoNs rEquIrEd for storaGE
If necessary, the attachment must be stored in a covered and dry environment, with the following characteristics:
∂ Temperature ranging between -20°C and +40°C;
∂ maximum humidity equal to 90%;
Moreover, the attachment must be completely protected from even unexpected jets of water�
In the event of storage in environments with elevated salinity, the cutting surfaces must be
cleaned, referencing
� The frequency is at the Customer’s
discretion�
4.14
dEsCrIptIoN of rEsIdual rIsks
Pursuant to EU Directive 2006/42/EC, the danger zones are listed below together with the residual risks which
cannot be eliminated without compromising the functionality of the attachment�
further information on the residual risks is found in the documentation provided with the
machines and in the machine manual.
General requirements
It is mandatory to use:
-
protective gloves
,
-
protective shoes
,
-
protective clothes
for the phases before use, use and maintenance of the attachment�
For the following description, refer to
�
All danger zones where there is a residual risk are indicated with a numerical reference on the attachment�
danger zone 1
Exposed person:
Operator�
stage:
work cycle�
Nature of the risk
: impact, crushing, shearing of limbs, projected debris�
specific requirements
do not
stand less than 25m from the attachment during the work cycle�
Summary of Contents for CAYMAN FCE II Series
Page 2: ......
Page 6: ...6 96 CAYMAN Version 01 Revision 00 09 05 2017...
Page 94: ...94 96 CAYMAN Version 01 Revision 00 09 05 2017...
Page 95: ......
