43 / 96
CAYMAN
Version 01 - Revision 00
09/05/2017
5.4
INstallatIoN
Attachment installation is the responsibility of
2
operators
�
a second operator on the ground is mandatory during attachment installation.
Metal shavings or debris may be projected when connection pins are hit; keep a safe distance
away when the pins are removed and installed.
do not
use pins and shims unless supplied by the Manufacturer�
The Manufacturer carries out specific training for the Operators indicated by the Customer who
will be using the attachment�
It is mandatory to wear:
-
protective gloves
,
-
protective shoes
,
-
protective clothes
,
-
protective goggles
,
-
protective helmet
to install the attachment�
Installation operations include:
∂ mechanically connecting the attachment to the machine;
∂ hydraulically connecting the attachment to the machine�
Refer to the machine manual for the operations on the machine indicated below�
5.4.1
Mechanically connecting the attachment to the machine
the attachment must be installed without other attachments already mounted (bucket, etc.).
rIsk of oVErturNING
The attachment can be installed on the machine bucket position or arm position, causing an
increase in the overturning moment at the foot of the machine; as such, the weight of the
machine must be carefully assessed before installation�
Refer to
“4.7.4 Machine features” on page 32
for the minimum weight of the machine on
which the attachment will be installed�
do not
remove and insert the pins with the attachment in positions other than the ones reported
in
1-
and
1-
�
Summary of Contents for CAYMAN FCE II Series
Page 2: ......
Page 6: ...6 96 CAYMAN Version 01 Revision 00 09 05 2017...
Page 94: ...94 96 CAYMAN Version 01 Revision 00 09 05 2017...
Page 95: ......
