D5110/D5111/D7110 User Manual
43
6.4.3 IP Filter
IP Filter provides the function of controlling the range of IP address, similar with firewall
service.
IP filter:
Select if you would like to have IP filter function.
Allow range:
The default range is from 0.0.0.0 to 255.255.255.255. Enter the “Start IP
address” and “End IP address” in the range, then you can add a new allow range in allow
range list.
Allow range list:
Except the default range 0.0.0.0~255.255.255.255, the list allows to
add four more sets of allow range at most.
Deny range:
You can define the deny range by entering “Start IP address” and “End IP
address”
Deny range list
: You can define not more than five sets of deny range in the list.