D5110/D5111/D7110 User Manual
48
7.2 SMTP
Set the SMTP menu when you want to send an image or video clip via e-mail. By using
Mail (SMTP) function, you can send a mail with attached
file which has been shot linked
with the external sensor input or with the built-in motion detection function. The file can
also be sent periodically. E-Mail (SMTP) setting menu is composed of three tabs,
General
,
Alarm sending
and
Periodical sending
.
7.2.1 General
Select
On
when you use the SMTP function. The common setting options are displayed
below. Select
Off,
if you do not wish to use the e-Mail (SMTP) function.
Note :
The Setting of general part will be the same as IP Notification.
(Please check “Setting
→
Basic
→
Network
→
IP Notification”)
SMTP server name
: Type the SMTP server name up to 64 characters, or the IP address
of the SMTP server.
SMTP Server Port
: You can set port number from 1~65535 according to your mail
server. The default value is 25.
Security setting
: Tick SSL box if the mail server you use has security restriction.
