D5110/D5111/D7110 User Manual
50
7.2.2 Alarm sending
Set to send the mail with connection to the alarm detection by the external sensor input or by
the built-in motion detection function.
Select On to send the image file to SMTP server
linked with the alarm detection.
Alarm sending
: Select
On
to set to send mail with connection to the alarm detection.
File attachment
:
Set whether an image file is attached to the mail sent or not. When
On
is selected, the image file made by the settings below is attached. When
Off
is selected,
only the message is sent.
Image file name
: Type the file name you want to assign to the file attached to a mail. You
can use up to 10 alphanumeric, - (hyphen) and _ (underscore) for naming.
Suffix
: Select a suffix to add to the file name
None
: The name of the sent file will be the Image file name.
Date & time
: The date & time suffix is added to the Image file name. The date & time
suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits) and second (2 digits), and consecutive number (2
digits), thus 14-digit number is added to the file name.
Sequence number
: A
consecutive
number is added to the Image file name.
Sequence number clear
:
Click
Clear
and the suffix of the sequence number returns
to 1.
