D5110/D5111/D7110 User Manual
54
Test
: After setting the network storage location information, you can tick the test key
to test if the connection between IP CAM and network storage location works.
Note:
If the recording video file is assigned to be stored in a low-speed device (ex.
low-speed USB storage disk), there might be some problems to complete the storage.
7.3.2 Alarm sending
Set to transmit the snapshot or video clip file with connection to the alarm detection by the
external sensor input or by the built-in motion detection function.
Select On to send the file
to network storage location linked with the alarm detection.
Alarm sending
: Select
On
to set to send mail with connection to the alarm detection.
Image file name
: Type the file name you want to assign to the file to attach a mail. You
can use up to 10 alphanumeric, - (hyphen) and _ (underscore) for naming.
Suffix
: Select a suffix to add to the file name
Date & time
: The date & time suffix is added to the Image file name. The date & time
suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits) and second (2 digits), and consecutive number (2
digits), thus 14-digit number is added to the file name.
Sequence number
: A
consecutive
number is added to the Image file name.
Sequence number clear
:
Click
Clear
and the suffix of the sequence number returns
to 1.
Alarm:
Motion Detection
:
Click it on for using
Motion Detection
function as a sensor. You
can set motion detection function at the motion detection function screen.
