F3105 User Manual
recorded on FTP server.
8.2.4 MJPEG
Viewer Authentication
:
On
: If the viewer authentication is On, the users will be requested to key-in username
and password when using QuickTime Player to have live viewing.
Off:
If the viewer authentication is Off, you can have live viewing on computer by
QuickTime Player after entering “rtsp://ip:port/video.mjpg” on the URL column
directly.
Multicasting streaming (if it’s on):
Multicast Address : Specify the multicast server address.
Video / Audio Port: Specify the transmission port number of the video data, from
1024 to 65535.
Time to Live: Set the maximum TTL that multicast can pass through.
Note: Time To Live option determines the maximum length of time (measure as the
number of network routers that can be passed before data arrives at its destination or
is dropped) within which a multicast packet must reach its destination.
Image Size
: Specify the image size when the network camera transmits. Choose among
1280 x 1024, 1280 x 720, 640 x 480, and 320 x 240.
Frame Rate
: Set the frame rate of the MJPEG image. Choose one among 1, 2, 3, 4, 5, 7,
10, 15, 20, 25, and 30 fps. The unit “fps” stands for “frames per second”.
Note: The frame rate is up to 15 fps at 1280x1024, and up to 30 fps at 640x480.
However, if you would like choose frame rate over 15 fps, the IMAGE SIZE of
H.264/MPEG-4/MJPEG setting page has to been selected 320x240 or 640x480 at the
same time.
30
Setting-Basic
Camera
Summary of Contents for F3100
Page 1: ...F3100 F3105 User Manual 0 ...