F3105 User Manual
Use the following IP address
: Select this option when
the fixed IP address is set.
IP address: Enter the IP address of the device.
Subnet mask: Enter the subnet mask.
Default gateway: Enter the default gateway.
Use the following DNS server address
: Select this when you set the fixed address as the
IP address of DNS server.
Primary DNS server: Enter the IP address of the primary DNS server.
Secondary DNS server: Enter the IP address of the secondary DNS server, if
necessary.
HTTP Port Number
: Select
80
in general situations. If you want to use a port number
other than
80
, select the text box and enter a port number between 1024 and 65535.
When you have set the HTTP port number to a number other than 80 on the Network
Setting screen in the Setup Program, access the device by typing the IP address of the
device on the web browser as follows: Example: when HTTP port number is set to
2000
http://192.168.1.100:2000/
Note: The IP Camera needs to be rebooted after it finishes changing the network setting
completely
.
Note: If you connect the IP Camera with your computer directly, the default network domain
of camera is 192.168.1.xx
8.3.2 PPPoE
If your ISP provides Dynamic IP with
authentication by username and password, type all
PPPoE information in this part. When using the PPPoE function, you need to turn on the
DDNS or IP Notification function at same time.
36
Setting-Basic
Network
Summary of Contents for F3100
Page 1: ...F3100 F3105 User Manual 0 ...
