P5110 / P5115 User Manual
45
8.3.6 IP Notification
When network notify type is set to “ON”, you can send an e-mail notification of the completion of
the network setting.
¾
Notify Type
: You can select the notify type among DHCP, Static IP, and PPPoE.
¾
SMTP Server Name
: Type the SMTP server name up to 64 characters, or the IP address
of the SMTP server.
¾
SMTP Server Port
: You can set port number from 1~65535 according to your mail
server. The default value is 25.
z
Security setting: Tick SSL box if the mail server you use has security restriction.
Note: If you use g-mail as your mail server, you should set 25 as your port number and
tick SSL box.
¾
Authentication
: Select the authentication required when you send an email.
z
Off: Select if no authentication is necessary when an email is sent.
z
On: When authentication is necessary an e-mail is sent, there are
SMPT, POP before
SMPT or both
three options.
¾
SMTP:
Select if SMTP authentication is necessary when an e-mail is sent.
¾
POP before SMTP
: Select if POP before SMTP authentication is necessary when an
e-mail is sent.
z
POP server name
: It is necessary when the
POP before SMTP
is selected in
Authentication
. Type the POP (receiving mail) server name up to 64 characters, or
type the IP address of the POP server. This setting is necessary when the SMTP server
which sends e-mails performs authentication using the POP user account.
Setting-Basic
Network
Summary of Contents for F5110
Page 1: ...P5110 P5115 User Manual i ...