background image

         

7.2 Preset Position 

In this section, up to 32 Pan and Tilt positions can be saved, as well as the home position, 

which the device faces to when the power is turned on.

 

 

 
7.2.1 Setting 

 

Set

: Use it to save the camera position to a preset number. 

Carry out the following steps. 

 

Move the camera to the position to be saved while you are checking the image with the 

main console. 

 

Write the preset position name in Preset Pos. Name text box. 

 

Click the 

SET

. The camera position is saved. 

 

If want to set this position as home position, click Home option on. Click the 

SET

. The 

camera position is saved as home position. 

Note

  Setting the new Home position will replace previous Home position.   

 

Reset

: When writing the preset position name in Preset Pos. Name text box, press 

Reset

 to 

clean filed words.   

 

Delete All

: Be careful! When pressing 

Delete All

, all Preset Position information will be 

deleted. 

 

Delete

: Select a preset number from 1 to 32 in the list box. Use it to delete specific number 

preset position setting. 

 

53

Summary of Contents for M511E











































































































Reviews: