7.5.2 Alarm sending
Set to send the mail with connection to the alarm detection by the external sensor input or by
the built-in motion detection function.
Select On to send the image and file to SMTP server
linked with the alarm detection.
PT control
Alarm sending
: Select
On
to set to send mail with connection to the alarm detection.
File attachment
:
Set whether an image file is attached to the mail sent or not. When
On
is selected, the image file made by the settings below is attached. When
Off
is selected,
only the message is sent.
Image file name
: Type the file name you want to assign to the image to attach a mail.
You can use up to 10 alphanumeric, - (hyphen) and _ (underscore) for naming.
Suffix
: Select a suffix to add to the file name
Date & time
:
The date & time suffix is added to the Image file name. The date/time
suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits), second (2 digits), and consecutive number (2 digits),
thus 14-digit number is added to the file name.
Sequence number
: A consecutive number of 10 digits between 0000000001 and
4294967295 and two fixed digits 00 is added to the Image file name.
Sequence number clear
:
Click
Clear
and the suffix of the sequence number returns
to 1.
67
Summary of Contents for M511E
Page 1: ...M511E User Manual 0 ...
