45
9.9
System Log
The system records all the actions in its internal memory and displays it on the
Current Log
, but due to
limited memory the logs will be overwritten. Enable remote log if you wish to keep all the logs.
Enable Remote Log
:
Server Name
– Insert the network address of the system log server. Enter the address without any
leading characters, such as http://
Server Port
– Default is 514. Change the value if your system log server is set up differently.
Remote log uses System Log Protocol, which is a standard for forwarding log messages in an IP network –
allowing your camera, the System Log sender, to send small text message to the System Log server.
3CDaemon by 3Com Corporation is a system log server that you may use for remote log (download
After installing 3CDaemon, the main window prompt and you can start to receive logs from the camera.
