48
Once you enabled it, the listed IP address are allowed or denied access to the network camera.
Add the IP address that you’d like to allow or deny, select allow or deny from the list and save
it.
9.3.3
HTTPS
Secure Sockets Layer (SSL) is a cryptographic protocol that provides security for
communications over networks such as the Internet.
HTTPS is a URI scheme used to indicate a secure HTTP connection (SSL encrypted). It is
syntactically similar to the http:// scheme that is normally used for accessing resources using
HTTP. The differences are that SSL-encrypted connections always begin with https:// instead
of http://. HTTPS connections use TCP port 443 by default, compared to standard HTTP
connections, which use port 80.
Create & Install:
Create a self-signed certificate for HTTPS to recognize.
Installed Certificate:
Display or remove the properties of the installed certificate.
HTTPS Connection Policy:
Set HTTPS connection policy for different level of users.
To use the HTTPS encryption, please set up “Create self-signed certificate” for the first time
you use the HTTPS function, and then set up the connection policy for different users.
Note: When enable HTTPS with RTSP on mode, the IP Camera only protect the setting such as
username and password and do not protect video and audio. When enable HTTPS with RTSP
off mode, the IP Camera will protect all setting including video and audio.
