Chapter 2
______________________________________________________
Zaxcom Fusion User’s Manual
102
Clear Delay button
Resets all of the channels to zero at one time.
Delay Mode button
Toggles between
msec
and
samples
.
NOTE:
It is not possible to have the channels‟ delay values in different units (
msec
and
samples
). If you enter a
value on one of the buttons and change the unit, the previously entered value(s) will be rounded (up or down)
to fit the new unit. So, pick one of the units and stick with it!
Adjusting the Delay
1.
Press the
Channel
button
for the channel you want to adjust.
The button changes to white indicating it is the selected channel.
2.
Press either
More Delay
,
Less Delay
or
Enter Delay
.
3.
Repeat steps 1 & 2 until all channels have been adjusted.
NOTE:
When using radio microphones, which have an inherent 0 to 8 ms delay, you can minimize phasing
anomalies between digital and analog equipment by adding the appropriate delay to the analog inputs.
