Zaxcom Fusion User’s Manual______________________________________________________Chapter 4
137
Assign Inputs to Output Channels
The
Output Mix page
{
p.41
} makes assigning the audio inputs to output channels, identical to assigning audio
inputs to recording channels. They use the same style matrix and have all the same settings.
Like the
Disk Mix page
{
p.37
}, any combination of signals can be assigned to a vast number of output possibilities.
Overview of Input Signals
The
Input Meter Menu page
{
p.64
} provides a quick overview of all input signals. Because of the flexibility of
the routing, you may run into situations where you need to try to determine if a signal is actually coming into the
Fusion on a particular input.
Overview of Output Signals
The
Output Meter Menu page
{
p.65
} provides a quick overview of all output signals. Because of the flexibility
of the routing, you may run into situations where you need to try to determine if a signal is actually going out of
the Fusion on a particular output.
