Chapter 2
______________________________________________________
Zaxcom Fusion User’s Manual
70
Page Notes
None
Page Level Shortcuts
None
Preset Loaded Name field
Appears just below the page title. Indicates which preset (User or Factory) is currently loaded. If it is not a saved
preset,
Working Preset
is displayed. Default setting: Factory 2
Disk Tracks Matrix buttons
Selects which disk tracks being recorded, are to be monitored. Left (
L
) and right (
R
)
buttons
send the specific
track(s) to the left and/or right ear cups.
Outputs Matrix buttons
Selects which output channels, are to be monitored. Left (
L
) and right (
R
)
buttons
send the specific track(s) to the
left and/or right ear cups.
Camera Returns Matrix buttons
Selects which Camera Returns, are to be monitored. Left (
L
) and right (
R
)
buttons
send the specific track(s) to the
left and/or right ear cups.
NOTE:
To monitor a single channel in both the left and right headphone mix, select it in both the left and right sides.
Disk Tracks/Outputs/Camera Returns Toggle button
Cycles the view between
Disk Tracks
,
Outputs
and
Camera Returns
views.
Factory Presets button
Pressing it takes you to the
Factory Presets page
{
p.71
}.
User Presets button
Pressing it takes you to the
Load/Save User Presets page
{
p.72
}.
Toggle On Recorded Tracks button
Automatically selects all tracks that are being recorded.
Phase Invert button
Reverses the phase of the monitored channel. This does not change the phase of the recorded channel, it only
reverses phase in the monitor. The selected matrix button will have a line over the
X
.
NOTE:
The phase invert follows any previous phase adjustment done in the recording matrices. If you have
reversed the phase for a channel, you do not have to reverse the phase here. It is already reversed.
