Chapter 2
______________________________________________________
Zaxcom Fusion User’s Manual
86
Analog Input (#) – EQ page
Page purpose:
Requires
EFFECTS PACKAGE
– This page maintains the EQ settings for each analog input
channel.
How to get here:
(
INPUT
key
Channel
button
EQ
button
)
(
MENU
key
Input Configure
button
Channel
button
EQ
button
)
Figure 2-46 Analog Input (#) - EQ page
Page Notes
See
– Effects Package and More
{
p.142
} for the theory behind using the Equalization processor.
** Coming Soon **
While in this page with the
Entry Mode
button
set to
CHANNEL
, pressing a number (1 – 8) causes the
appropriate Analog channel EQ to be displayed.
Once the parameters for a band/notch have been entered, press the
ENTER
key
. The status indicator (upper
right corner), changes to
INLINE
, meaning that it is now active. If you press
ENTER
once again, the status
indicator changes back to
BYPASSED
, meaning that it is now inactive.
Default settings:
o
Band #1
– Type:
Lo Shelf
, Level:
0.0 dB
,
Freq:
300 Hz
, Q:
1.0
o
Band #2
– Type:
Peaking
, Level:
0.0 dB
,
Freq:
2000 Hz
, Q:
1.0
o
Band #3
– Type:
Hi Shelf
, Level:
0.0 dB
,
Freq:
5000 Hz
, Q:
1.0
o
Notch #1
– Type:
Off
,
Level:
-96.0 dB
, Freq:
60 Hz
,
Q:
9.9
o
Notch #2
– Type:
Off
,
Level:
-96.0 dB
, Freq:
120 Hz
, Q:
9.9
EQ page Level Shortcuts
ENTER
key
– alternately enables (inline) and disables (bypassed) ALL EQ settings for the current
channel. When a channel's EQ has been bypassed, the settings are still maintained until
they are specifically modified.
RIGHT ARROW
key
– advances to the next filter band (note the green light in the buttons on the bottom of
the page).
LEFT ARROW
key
– advances to the previous filter band.
UP ARROW
key
– changes the current band‟s filter type:
o
Band 1 – 3 are band filters selectable as
Lo Shelf
,
Hi Shelf
,
Peaking
or
Off
.
o
Notch 1 & 2 are notch filters selectable as
Off
or
On
.
U
key
– resets the
Level
field
of all bands of the current channel to unity (
0.0
), effectively
negating them.
L
key
– changes focus to the
Level
field
.
F
key
– changes focus to the
Frequency
field
.
Q
key
– changes focus to the
Q
field
.
E
key
– advances to the
EQ Memory
page
.
R
key
– resets the
Level
,
Frequency
and
Q
field
s
BACKSPACE
key
– advances to the
EQ Memory
page
.
