background image

 

 

 

Zaxcom Warranty Policy and Limitations

 

 

Zaxcom Inc. values your business and always attempts to provide you with the very best service. 

 

No limited warranty is provided by Zaxcom unless your MicPlexer2 (“Product”) was purchased from an authorized distributer or authorized reseller.  

Distributers may sell Product to resellers who then sell Product to end users. Please see below for warranty information or obtaining service. No warranty 

service is provided unless the Product is returned to Zaxcom Inc. or a Zaxcom dealer in the region where the Product was first shipped by Zaxcom. 

 

Warranty Policy 

 

The Product carries a Standard Warranty Period of one (1) year. 

 

NOTE:

  The warranty period commences from the date of delivery from the Zaxcom dealer or reseller to the end user. 

 

There are no warranties which extend beyond the face of the Zaxcom limited warranty. Zaxcom disclaims all other warranties, express or implied, 

regarding the Product, including any implied warranties of merchantability, fitness for a particular purpose or non-infringement. In the United States, some 

laws do not allow the exclusion of the implied warranties. 

 

Troubleshooting & Repair Services 

 

No Product should be returned to Zaxcom without first going through some basic troubleshooting steps with the dealer you purchased your gear from. 

 

To return a product for repair service, go to the Zaxcom Repair Services pagneed to call the factory for an RMA.  Then send your item(s) securely packed (in the original packaging or a suitable substitute) to the address that was 

returned on the Repair Services page.  Insure the package, as we cannot be held responsible for what the shipper does. 

 

Zaxcom will return the warranty repaired item(s) via two-day delivery within the United States at their discretion. If overnight service is required, a FedEx 

or UPS account number must be provided to Zaxcom to cover the shipping charges. 

 

*Please note a great resource to troubleshoot your gear is the Zaxcom Forum 

Warranty Limitations 

 

Zaxcom’s limited warranty provides that, subject to the following limitations, each Product will be free from defects in material and workmanship and will 

conform to Zaxcom’s specification for the particular Product. 

 

Limitation of Remedies 

 

Your exclusive remedy for any defective Product is limited to the repair or replacement of the defective Product. 

 

Zaxcom may elect which remedy or combination of remedies to provide in its sole discretion.  Zaxcom shall have a reasonable time after determining that 

a defective Product exists to repair or replace a defective Product.  Zaxcom’s replacement Product under its limited warranty will be manufactured from 

new and serviceable used parts. Zaxcom’s warranty applies to repaired or replaced Product for the balance of the applicable period of the original 

warranty or thirty days from the date of shipment of a repaired or replaced Product, whichever is longer. 

 

Limitation of Damages 

 

Zaxcom’s entire liability for any defective Product shall, in no event, exceed the purchase price for the defective Product.  This limitation applies even if 

Zaxcom cannot or does not repair or replace any defective Product and your exclusive remedy fails of its essential purpose. 

 

No Consequential or Other Damages 

 

Zaxcom has no liability for general, consequential, incidental or special damages. These include loss of recorded data, the cost of recovery of lost data, lost 

profits and the cost of the installation or removal of any Product, the installation of replacement Product, and any inspection, testing or redesign caused 

by any defect or by the repair or replacement of Product arising from a defect in any Product. 

 

In the United States, some states do not allow exclusion or limitation of incidental or consequential damages, so the limitations above may not apply to 

you.  This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. 

 

Your Use of the Product 

 

Zaxcom will have no liability for any Product returned if Zaxcom determines that: 

 

 

The Product was stolen. 

 

 

The asserted defect: 

 

 

Is not present, 

 

 

Cannot reasonably be fixed because of damage occurring when the Product is in the possession of someone other than Zaxcom, or 

 

 

Is attributable to misuse, improper installation, alteration, including removing or obliterating labels and opening or removing external covers (unless 

authorized to do so by Zaxcom or an authorized Service Center), accident or mishandling while in the possession of someone other than Zaxcom. 

 

 

The Product was not sold to you as new. 

 

Additional Limitations on Warranty 

 

Zaxcom’s warranty does not cover Product, which has been received improperly packaged, altered or physically abused. 

 

interstage

Phistersvej 31, 2900 Hellerup, Danmark

Telefon 3946 0000, fax 3946 0040

www.interstage.dk

-

 pro audio with a smile

Summary of Contents for MicPlexer 2










Reviews: