Nomad Touch Input Configure
28
Input Configure
Selecting
INPUT CONFIG
opens the setup page for the 10 analog
inputs (6 Mic/Line, and 4 line level returns) and 8 AES digital
inputs.
From the input configure menu the following items can be
adjusted (plese note the AES input configuration currently only
allows for trim adjustments).
Mic / Line input select (not available for return inputs)
Engage 48 volt phantom power (not available for return
inputs)
Input phase invert
Input delay adjust
Notch filters engage and adjust
High pass filter engage and adjust
Adjust and link input compressor settings.
Please note the compressor setings are global and
adjustments made to one input will be reflected to all
the inputs that has the compressor engages
Selecting an input
Use the up and down arrow on the side of the input name to
toggle through the inputs.
Adjusting an input parameter
Select an item to be adjusted.
That selection background will change to green and an up
and down arrow wil appear on either side of the item.
Use the arrows to adjust the peramaters.
Tapping and holding on a parameter will open a text editor
box so that a specific number can be entered.
When done click on that setting, or select another item, to
turn the item back to grey.
