Oasis Time Code Menu
13
Manually entering time code and user bits
Selecting the
ENTER TIME CODE
key will open the time code
editor, and selecting the
ENTER USER BITS
key will open the
user bit editor.
From the editor enter the desired time code and user bits
then select the green enter key to set the time code and user
bits.
Turrning on incremential user bits
Selecting the
INC USER BITS
key will toggle on and off the
incremential user bit feature. When the incremential user bits
is set to on the user bits will increase by 1 eveytime a new
take is recorded.
Jamming time code and user bits
Select
JAM T.C.
to jam time code from an external source
connected to the time code in on Nomad.
Select
JAM U.B.
to jam the user bits from an external source
connected to the time code in on Nomad.
Select
JAM DATE
to jam the user bits from Nomads internal
calander.
Select
JAM TIME
from the time code from Nomads internal
clock.
