Oasis Input Channel Routing Menu
27
Input channel routing menu
The input routing menu is opened when the BUS key is pressed on the Oasis control surface. The input routing menu is
an easy way to identify all the routing for a specific input, as well as a way to quickly assign inputs to the output busses
and record tracks. Please note that any changes made in this menu will be reflected in the output and track routing
menus, and any changes to those menus will be reflected in this matrix.
Selecting an input
Select the input to be assigned.
Digital inputs 1 through 8
Analog inputs 1 through 6
Return inputs (analog 7 through 10)
Routing the input
For the input what will be routed to it.
Output buses 1 through 6
Record tracks 1 through 12
Setting an input as pre or post fade
Select the
FADER
key to toggle between pre and post fader.
After the fader key is set to the desired mode select the
input to be routed. If the fader key is set to pre-fade any
input selected will be set to pre-fade and if the fader key is
set to post-fade the input will be set to post-fade. The input
will show that it is set post-fade (fader icon) or pre-fade (no
fader icon):
Setting the phase of an input
Select the
PHASE
key to toggle between normal and inverted
phase. When a source is select its phase is set to follow the
phase key setting. So if the phase is set to normal all sources
selected will have normal phase and if the phase is set to
inverted all sources selected will have its phase inverted.
When the phase is inverted a white line will be displayed
across top of the source.
