Main Menu Fader Assign
13
Assigning Inputs to a Fader / Bank
The fader assign matrix is where the five faders are assigned what inputs they
will control. All five fader banks are assigned from this menu. Any assortment of
analog inputs, digital inputs, or wireless receiver outputs can be assigned to any
fader.
Please note if a fader does not have any assignment the LED’s around the fader
will not illuminate.
Setting a Cross point
1.
Select the type of input to be routed by pressing F9 - Analog, F10 - Digital, F11 - Wireless Receiver.
2.
Rotate the MENU knob to scroll through the matrix to the desired cross point.
3.
Press the MENU knob to select the cross point.
4.
Pressing the F7 and F8 keys to navigate through fader banks.
Changing banks
Pressing the bank key once will display what is assigned to the faders in the bank
Additional presses will advance to the next bank.
Bank 1 is Red, Bank 2 is Yellow, Bank 3 is Green, Bank 4 is Blue and Bank 5 is purple.
