Direct Access Keys Media Menu / Mirror Card
38
File Naming Protocol
File naming sets the way the individual files are named.
•
Z001001
- Creates a file name in the format of -
Folder Name
and
Segment Number
. This is the default
and recommended naming protocol.
So for example folder Z001 (or whatever name was created) and segment (for example 018) would be
Z001018.WAV (folder name / file number). The next file would be Z001019.WAV.
•
1 T2 Z001
- Creates a file name in the format of -
Scene
,
Take
,
Folder Name
and
Segment Number
.
For example scene “1”, Take “2” in folder “Z001” and segment number “18”, the file name will be
“1_T2_Z001018.WAV”.
Warning - when using this naming protocol do not create a scene or take with
any characters other than letters or numbers.
•
1 T2
- Creates a file name in the format of -
Scene
and
Take
separated by and underscore.
For example scene “1”, Take “2” in folder “Z001” and the segment number is “18”, the file name will be
“1_T2.WAV”.
Warning when using this naming option avoid creating duplicate file names within a
folder, if duplicate file names are created the files will not mirror properly.
•
1T2
- Creates a file name in the format of -
Scene
and
Take
with no separation.
For example scene “1”, Take “2” in folder “Z001” and the segment number is “18”, the file name will be
“1T2.WAV”.
Warning when using this naming option avoid creating duplicate file names within a folder,
if duplicate file names are created the files will not mirror properly.
Please note that all segment numbers will be a three digit number. The first file in a folder will always be
001.
Follow Primary
•
Auto Change
- When changing the primary folder the mirror folder will automatically change to follow
the selected primary folder.
•
None
- When changing the primary folder the mirror folder will not change.
Mirror Options
Remember mirror options after power cycle allows Nova to stay in the last mirror mode setting before
being been powered off. If this option is set to OFF, any time Nova is powered down the mirror mode
will default to OFF and will need to be turned back on. Please note that even if Nova is setup to allow
mirroring mode to be remembered after a power cycle if a CF card is not installed in the mirror slot after
the unit boots-up - mirror mode will be turned off and must be manually turned on after a mirror card is
inserted.
Time Code Offset
The time code offset is used to create an offset for the mirror files. An offset can be set from -500ms to
+500ms in 1ms increments.
Format Mirror Card
This is where the mirror CF card is formatted. To format press the STAR key. Pressing the BACK key will
exit the format page.
