Zaxcom ZFR 200 /
300 Manual____ _______________ ___ ___
Extended Menu
20
Encryption Menu
ENCRYPTION MENU:
HIDDEN
This hides the Encryption Menu.
•
HIDDEN
the encryption menu doesn’t appear when you cycle through the menu settings.
•
ON
the Encryption will appear.
Encryption Code page
ID
1
:000 ID0:000
If you set an encryption code the transmitted audio will be encrypted and can only be
listened to if the receiver has the matching encryption code entered. When an ERX receives
an audio signal and the codes do not match, all that will be heard is white-noise.
These two sets of numbers are formed into a single six-digit encryption code which
provides a total of 16,777,216 possible combinations.
To adjust the encryption code
1. Momentarily press the
MENU
key
to advance to the next character.
2.
To change the designated character, press the
INC
or
DEC
key
.
3.
To exit this page, press and hold the
MENU
key
for 1 second.
NOTE:
Both of these codes should always be set to
000
for normal un-encrypted operation.
ENCRYPTION MENU:
HIDDEN
ID1:000 ID0:000
Summary of Contents for ZFR200
Page 1: ......