Scan
Scanning mode:
Good-read off-
The trigger button must be pressed to
activate scanning. The light source of scanner stops
scanning when there is a successful reading or no code is
decoded after the Stand-by duration elapsed.
Momentary-
The trigger button acts as a switch. Press button
to activate scanning and release button to stop scanning.
Alternate-
The trigger button acts as a toggle switch. Press
button to activate or stop scanning.
Timeout off-
The trigger button must be pressed to activate
scanning, and scanner stops scanning when no code is
decoded after the Stand-by duration elapsed.
Continue-
The scanner always keeps reading, and it does
not matter when trigger button is pressed or duration is
elapsed.
Same Barcode delay time:
If the barcode has been
scanned twice, then only the first barcode will be accepted.
Double confirm:
If it is enabled, the scanner will require a
several times successful decoding to confirm the barcode
data. The more confirming times required the more inhibitive
miss-reading code will be shown. If you set Double confirm,
the Multi field scan Enable function won’t be able to work.
21
Summary of Contents for ZB-8150
Page 46: ...Code ID setting 00 ffH ASCII code 00 ffH i Insert group selection 00 44 00 44 00 Exit 46...
Page 89: ...Test Chart CODABAR PARA CODE 11 PARA CODE 128 PARA CODE 39 PARA CODE 93 PARA EAN 13 PARA 89...
Page 90: ...PDF 417 STANDRAD 25 PARA CODE 16K EAN 8 PARA INDUSTRIAL 25 PARA UPCE PARA 87549 90...
Page 91: ...INTERLEAVED 25 PARA MATRIX 25 PARA MSI PLESSEY PARA UPCA PARA UK PLESSEY PARA 91...
