background image

3.

 

RIDING INSTRUCTIONS 
 

There are four main skills required to effectively ride the ZBoard: coasting, accelerating, braking 
and turning. This section will discuss each skill in detail.  

Practice in a safe, flat area free of obstacles and pedestrian and vehicle traffic.

 

 

3.1.

 

THE COAST STANCE

 

Make sure the power is OFF (the LED ring should not be illuminated). Stand on to the ZBoard 
with the COAST stance, seen in 

Figure A

 

Figure A: Diagram of standing on the board correctly in the COAST stance 

In the COAST stance the rider is neither accelerating nor braking, but rather stationary or 
slowing down gradually due to the natural resistance of the motor and bearings. When 
coasting downhill it is best to ride in the BRAKING stance described in Section 3.3, to 
maintain optimal control of speed. 

The correct COAST stance is to orient one’s feet perpendicular to the direction the board is 
pointing, at approximately shoulder width with toes flared out slightly for balance.  

Get comfortable with the flexibility of the trucks by carefully leaning towards your toes, and 
then your heels, bending your knees slightly for balance.  Do not yet turn on the board. 

If you are unfamiliar with board sports see Section 3.6 to determine which foot to put forward 
along with other riding techniques.  

 

 

Summary of Contents for Blue Edition
















Reviews: