background image

zBoost

®

 Cellular REACH ZB560Y Manual

12

Frequently Asked Questions

What can I expect my cell phone signal range and strength to be inside my home?

The closer you are to the base, the stronger the signal. This will vary with different conditions. Some 

of the conditions that will affect the improved coverage area are signal strength outdoors, the type 

of building materials in the home, the placement of the unit and the antenna’s proximity to cellular 

towers.

You can expect that your indoor coverage will be improved. You will be able to make calls where 

you couldn’t before. The degree of improvement will depend upon many factors. The intent of 

zBoost products are to bring outside coverage inside. Just as the signal bars move up and down 

when outside, the boosted signal will fluctuate in a similar fashion. 

Is a cellular phone signal booster the same as a wireless router; will it help my WiFi signal? 

The zBoost unit will not help your WiFi service. This unit is designed to work with wireless PCS and 

Cellular phones and devices. The WIFI in your home operates on a different frequency.

Why isn’t my cell phone indicating more signal with more bars?

You may not always observe more bars that gain on your signal meter because of the signal 

spreading out from the antenna. If your phone has a dB meter, 3 dB is a significant increase of 2x, 

6 dB is 4x, and 10 dB is 10x. On a four bar phone, one "bar" equals about 10 dB.  

The increase in signal you will see depends upon:

• 

The level of signal at the External Antenna (outdoor)

• 

The care of the antenna placement (two feet away from metal, adequate antenna 

separation [15 feet recommended])

• 

The signal already present inside (related to building losses)

• 

The distance of your phone/device from the Base Unit (signal spreads or diminishes rapidly 

with distance.)

There are usually several cell phones in use at one time in my home, will your product boost 

all of our signals simultaneously?

The zBoost ZB560Y Cellular REACH is designed to cover multiple signals simultaneously and will 

allow multiple users to operate at the same time.

Does the zBoost work if you have no bars?

No, if no signal is present outdoors zBoost products will not work for you. Also, keep in mind if your 

best signal is 1 bar at the External Antenna, your coverage will be limited to a small room. 

Summary of Contents for ZB560Y























Reviews: