SP230/SP230-S5
2x2 PtP/PtMP 802.11ac Wave 2 Outdoor Access Point
User Manual
Page 62
Parameter
Description
Authoritative
Select this option to specify that this DHCP server is the only DHCP
server on the local network.
Local server
Enter the domain specification of the local DHCP server here. Names
matching this domain are never forwarded and resolved from DHCP or
host files only.
Local domain
Ener the local domain here. The local domain suffix is appended to
DHCP names and hosts file entries.
Log queries
Select this option to write received DNS requests to the syslog.
DNS forwardings
Enter the IP address or domain name of the DNS server to which DNS
requests are forwarded to.
More than one entry can be created.
Rebind protection
Select this option to discard upstream RFC 1918 (Address Allocation
for Private Internets) responses.
Allow localhost
Select this option to allow upstream responses in the 127.0.0.0/8
(loopback purposes) range.
Domain whitelist
Enter the domain name that is whitelisted for RFC 1918 responses
here.
More than one entry can be created.
The following parameters are available in this section:
Parameter
Description
Use / etc / ethers
Select this option to use / etc / ethers to configure the DHCP server
here.
Leasefile
Enter the name and path where the DHCP lease file will be saved here.
Ignore resolve file
Select this option to ignore the resolve file.
Resolve file
Enter the name and path for the DNS file here.
Ignore Hosts files
Select this option to ignore hosts files.
Additional Hosts files
Enter the name and path of the additional hosts files here. More than
one entry can be created.
