Firmware Version: Firmware is stored in a flash memory and can be upgraded easily, using
your Web browser, and can be upgraded via ftp server or ftp server. The currently available
version of AG-3621 is 1.1.3.0.
IP Type: By default, the AG-3621 is configured as static IP Address.
IP Address: The IP address must be unique to your network. The default IP address is
192.168.1.1
Note
To associate the access point to your PC, make sure the PC IP address
need to be matched the AP. For instance, the AG-3621 is 192.168.1.1, and
your PC IP should be 192.168.1. X.
Subnet Mask: The Subnet Mask must be the same as that set on the LAN that your Access
Point is connected to. The default is 255.255.255.0.
Operating Mode: AG-3621 provides five modes, Access Point, Station, bridge, repeater and
inter-building.
Access Point: Act as a standard 802.11a/b/g. The default mode is Access Point.
Station: Perform as a client station associated to other APs. Be sure that they share the same
SSID when connected.
Bridge: The AG-3621 acts as a bridge connecting APs. Two bridge modes are available
below.
Point-to-Multi-Point Bridge:Select this only if this AG-3621 is the “Master” for a group of
bridges. The other bridge must use this AG-3621 MAC address. They then send all traffic to
this “Master”, rather than communicate directly with each other. WEP should be used to
protect this traffic.
Wireless Repeater: In this mode, the AG-3621 can communicate with another wireless station
or wireless bridge. You can enter the MAC address of both adjacent repeaters in the fields
provided to communicate with other wireless bridge or use SSID to communicate with other
wireless station. WEP should be used to protect this communication.
Wireless Mode: Select the desired wireless operating mode. The default mode is 802.11a.
Channel: This field identifies which operating frequency will be used.
Security Profiles: This provides a list of virtual APs derived from AG-3621 Virtual AP, spelling
out profile name, SSID, MAC, security, and status.
18
== CONFIDENTIAL (All right reserved by Zcomax uk ltd) ==
19 Colindale avenue, London NW9 5DS
HTTP://www.zcomax.co.uk
Tel: +4420 8982 8200