User’s Manual 1PH HYD3000-HYD6000-ZP1
Rev. 1.0 01/09/2023
Identification: MD-AL-GI-00
Rev. 1.1 of 27/01/2023 - Application: GID
103/193
10.3.
Commissioning
Main interface:
Figure 59 – Main interface
1
Circulates current PV and battery statue
4
Display current inverter status
2
PV Power
5
Grid Power
3
Battery Power
6
Loads Power
The default setting of the 1PH HYD3000-HYD6000-ZP1 inverter is “Automatic Mode” so if the setting has not been
changed, the operating mode will be as follows:
•
When “Photovoltaic Production” > “Household Consumption”
If the battery is not charged, the 1PH HYD3000-HYD6000-ZP1 inverter will charge the battery.
•
When “Photovoltaic Production” < “Household Consumption”
If the battery is not discharged, the 1PH HYD3000-HYD6000-ZP1 inverter will discharge the battery and
provide power to the domestic load.
