User’s Manual 1PH HYD3000-HYD6000-ZP1
Rev. 1.0 01/09/2023
Identification: MD-AL-GI-00
Rev. 1.1 of 27/01/2023 - Application: GID
52/193
6.2.
Grid connection
Install AC wiring terminals
Take out AC wiring terminals from the carton of the inverter, strip and install cables according to the
appropriate specifications
Figure 28 – Wire stripping size
Step 1:
After riveting the peeling wire to the insulation terminal, thread it into the lock wire nut and the main
body.
Step 2:
Insert the cable into the rubber core according to the wire sequence, make the insulation terminal flush
with the surface of the rubber core, and press the screw torque 2.0± 0.1n.m
