ZDC ZA-5000 User's Manual V2.2.5
Chapter 5 Management
Page 42
button, then the AP will restart.
z
FTP
1.
Login AP by ftp.
2.
Input command get zag5000.cfg, it will be saved in current directory.
3.
Input command put zag5000.cfg, it will retrieve it to AP. and AP will restart.
The config file must be zag5000.cfg or ZAG5000.cfg
Do not try to turn off the Access Point, shutdown the computer or do anything else to the
Access Point until the Access Point finishes restarting!
Restore to Factory
There are two kinds way to restore Access Point to factory.
z
WEB
C:\>ftp 192.168.0.228
Connected to 192.168.0.228.
220 (vsFTPd 1.1.3)
User (192.168.0.228:(none)): admin
331 Please specify the password.
Password:
230 Using binary mode to transfer files. Login successful. Have fun.
ftp> get zag5000.cfg
200 PORT command successful. Consider using PASV.
150 Ok to send data.
226 File receive OK.
ftp: 3973128 bytes sent in 0.55Seconds 7263.49Kbytes/sec.
ftp> quit
221 Goodbye.
Notice:
