11
Profiling time: This setting is the sampling time used during the dive, it
•
can be set to either 10 or 30 second intervals.
Maximum Depth Alarm: This alarm will generate a sound when it
•
reaches the set depth. The setting range is 4-328 ft. (2-99 meters),
and can be set in 1 foot increments.
Dive time alarm: This alarm generates a sound when it reaches a div-
•
ing time value set by the diver. The setting range is 1-599 minutes in 1
minute increments.
Nitrox Icon: This Icon is ON when any mix has been set to a value
•
other than “AIR” (MIX1) or “--” (MIX2 and MIX3). It blinks if the MIX2
and MIX3 settings are at the default value.
Sea/Fresh Water: This display indicates if the computer is set to calcu-
•
late based on sea water or fresh water.
Gage Mode Icon: This icon will be displayed if gage mode has been
•
selected.
CAUTION
The “--” display: The setting changes to this display automatically
at Midnight (00:00) on the day the MIX value was set, except when
the setting is “AIR”. If the user forgets to set the FO2 an audible
and flashing alarm is generated when the computer moves to Dive
mode.
If MIX1 is set at “AIR” (21%) and MIX2 or MIX3 is set at 21% or “--%”
the setting for MIX1 will remain at 21%. The displayed setting for
MIX2 and MIX3 will always revert to “--%” at Midnight (00:00) on the
day the value was originally set.
Summary of Contents for N2iTion3
Page 1: ...N2iTion3 Dive Computer Owner s Manual...
Page 4: ...iv...
Page 6: ...vi...
Page 43: ...37...