6
Installation on double pan & tilt
1. Mount the quick release plate to Micro 2 from the bottom (with the 1/4” -to-3/8” screw
adapter)
2. Make the dual positioning screw hole visible by moving the Upper Slider sideways,
then tighten the dual positioning screws with the Allen key. Make sure there are at least
two screws tightened to ensure precise positioning and stable installation.
3. Attach the quick release plate to the camera.
4. Mount the pan & tilt to Micro 2
5. Mount Micro 2 to the pan & tilt on the tripod.
6. Mount the camera (with quick release plate) to the pan & tilt on the slider.
