16
LCD Contrast
1.
From the Setup menu, make sure that LCD Contrast
is selected, then press the
s
key.
2.
Contrast may be adjusted from high contrast (1) to
very low contrast (30) by pressing the
v
and
^
keys. Settings “wrap around” if you go lower than 1
or higher than 30. Default is medium contrast at 14.
3.
When contrast is properly adjusted, hit the
s
key
to save the setting and automatically return to the
Setup Menu. Or hit
f
to return without saving a
new setting. The PDC remembers your settings, and
will use them each time the PDC is turned on until
they are modified.
Beep Volume
You can set beep “volume” on the PDC in four settings:
Low, Medium, Loud, and Quiet. Low means a low, quiet
tone (C#7). Medium means a medium tone (F#7). High
means a higher tone (A#7).
Note:
“Quiet” means silent, no tone at all.
1.
From the Setup Menu (page 15), pressing the
v
to
select Beep Volume, then press
s
. You enter
Beep Volume setup and see the current Beep Vol-
ume setting.
Summary of Contents for Z-1060
Page 1: ......
Page 26: ...22 DIMENSIONS Figure 11 PDC Dimensions...
Page 27: ...23...
Page 28: ...Part no MUL 53250 01...
