ZEBEX INDUSTRIES INC.
1
Subject
4
Version
=
Date
&
Page
Power Pack Software Utility Operation Manual
0.9.4
2008/6/1 8
/ 33
Using the Zebex Power Pack
Backlight
This application is set up the Backlight of LCD Panel and Key pad. It
allows operators to set backlight duration, and also backlight can be set
up as On & Off.
The Backlight Setting screen including 3 parts:
1. LCD
2. Keypad
3. Brightness Control Bar
1.
LCD:
The LCD backlight setting.
Auto Mode:
This model can be used to set up LCD backlight
lighting automatically off when the LCD hasn’t been
activated for certain interval from 15 sec.(Min) to 15
min.(Max).
Always ON:
This function can set up the backlight to be always on
until the
system into suspend or sleeping mode.
Always OFF:
This function can set up the backlight to be always off.
