background image

 

 

ZEBEX INDUSTRIES INC. 

 



Subject 

Version  

Date

Page 

 

Z-2170 series User’s Manual 

2.01 

2015/12/25 

7

 / 48

 

 

Battery Information 

 

  Use only a ZEBEX approved batteries.   

  Using any other type of battery and charging equipment may damage the 

device and invalidate the warranty.   

  Store batteries at half of full charge in a dry, cool place, removed from the 

equipment to prevent loss of capacity, rusting of metallic parts and electrolyte 
leakage.  

  When batteries are stored over six (6) months, some irreversible deterioration 

in overall battery quality may occur.   

  When storing batteries for over a year, the charge level should be verified at 

least once every 6 months and charged to half of full charge. 

 

Battery Safety 

 

  The area in which the units are charged should be clear of debris and 

combustible materials or chemicals.   Particular care should be taken where 
the device is charged in a non -commercial environment.   

  Follow battery usage, storage, and charging guidelines found in the user 

guide.  

  Improper battery use may result in a fire, explosion, or other hazard.   

  To charge the device battery, the battery and charger temperature must be 

between 0

~+45

 

  Do not use incompatible batteries and chargers. Use of an incompatible 

battery or charger may present a risk of fire, explosion, leakage, or the 
hazard.  

  Do not disassemble or open, crush, bend or deform, puncture, or shred.   

  Severe impact from dropping any battery-operated device on a hard surface 

could cause the battery to overheat.   

  Do not short circuit a battery or allow metallic or conductive objects to contact 

the battery terminals.   

  Do not modify or remanufacture, attempt to insert foreign objects into the 

battery, immerse or expose to water or other liquids, or expose to fire, 
explosion, or other hazard.   

  Do not leave or store the equipment in or near areas that might get very hot, 

such as in a parked vehicle or near a radiator or other heat source. Do not 
place battery into a microwave oven or dryer.   

  Battery usage by children should be supervised.   

  Please follow local regulations to promptly dispose of used re-chargeable 

batteries.  

  Do not dispose of batteries in fire.   

  Seek medical advice immediately if a battery has been swallowed. In the 

event of a battery leak, do not allow the liquid to come in contact with the skin 
or eyes. If contact has been made, wash the affected area with large 
amounts of water and seek medical advice. 

  Do not short the battery terminals. The battery could overheat.   

  Do not attempt to split or peel the outer casing.   

 

Summary of Contents for Z-217 Series

















































Reviews: