ZEBEX INDUSTRIES INC.
The LCD Panel setting:
Auto Timeout: This function is used to turn off the LCD backlight
automaticually after certain period of inactivity. You can set the Auto off time
from 15 sec to 15 min using the Timer setup as illustrated below.
Always ON: This function is used to set the backlight to always on until the
system goes into suspend mode.
Always OFF: This function is used to set the backlight to always off.
The Keypad Backlight setting:
Auto Mode: This function is used to set the keypad backlight to auto off after
certain period of inactivity. The interval of the time for auto off is fixed on 5
seconds.
Always ON: This function is used to set the keypad backlight to always on
until the system into suspend mode.
Always OFF: This function is used to set the backlight to always off.
Subject
Version
Date
Page
Z-2170 Plus User’s Manual
1.00
2014/05/14
24
/ 44
