OUTLINE FOR PRODUCT REFERANCE MANUAL
Z-3070 CCD BARCODE SCANNER
Start of Configuration
INTER-CHARACTER DELAY
This option governs delay time between consecutive characters.
Scanning the following labels can alter the delay time.
None
10 msec
20 msec
50 msec
MESSAGE / BLOCK MODE SELECTION
This option allows you to treat scanned data as either an independent
message or a block message. In the message mode, the data scanned
will be transmitted immediately. In block mode, the data scanned will
be appended to the message buffer if the scanner is programmed in
block mode. A block of message will only be transmitted after a “Send”
command is entered. This mode is only available when the scanner is
working with code 39 labels. You are free to choose any character as
the “ Send” command.
Message
Block
End of Configuration
ZEBEX INDUSTRIES INC.
All Rights Reserved.
21
