Advanced Handheld High-Speed Laser Scanner
18
U
SER
’
S
M
ANUAL
Start Of Configuration
3.
General Scan Mode Setting
Handheld Operation
Barcode
Value
Barcode Label
Description
SM01
Trigger Mode
The scanner becomes inactive as soon as the data
is transmitted. It must be triggered to become
active again.
SM02
Auto Scan Mode
The scanner is still active after the data is
transmitted but the successive transmission of
the same barcode is not allowed when the trigger
switch is pressed again.
SM04
Pulse Mode
The scanner will light up and blink when press the
scanner trigger switch once and the scanner will
turn off after next pressing. The laser remains on
for approximately 3 to 10 seconds after the pulse
light is on.
SM07
Auto Trigger Mode
The scanner will automatically detect object and
activate laser lighting. Barcode data is
transmitted when the trigger is pressed.
SM08
Aim Mode
When the trigger is pressed once, the scanner
will light up, blink and decode automatically. But
the data is transmitted only when the trigger is
released. The scanner will turn off when the
trigger is pressed again.
SM09
Momentary mode
The scanner will light up only when the trigger
switch is pressed the scanner will turn off when
the trigger switch is release.
End Of Configuration
Summary of Contents for Z-3151HS
Page 1: ...Advanced Handheld High Speed Laser Scanner 1...
Page 2: ......
