Zebex Z-6070 Series, User Manual

Dual-Laser Omnidirectional Scanner 

i 

Importance 

This equipment generates, uses and can radiate radio frequency energy. If not installed and used 
in accordance with the instructions in this manual, it may cause interference to radio 
communications. The equipment has been tested and found to comply with the limits for a Class 
A computing device pursuant to EN55022 and 47 CFR, Part 2 and Part 15 of FCC Rules. These 
specifications are designed to provide reasonable protection against interference when 
operated in a commercial environment. 
 

For CE-countries: 

It is in conformity with the CE standards. Please note that a CE-Marked power supply unit should 
be used to conform to these standards. 
 

Radio and television interference 

 
Operation of this equipment in a residential area can cause interference to radio or television 
reception. This can be determined by turning the equipment off and on. The user is encouraged 
to try to correct the interference by one or more of the following measures: 
 



Re-orientate the receiving antenna 



Relocate the device with respect to the receiver 



Move the device away from the receiver 



Plug the device into a different outlet so that the device and the receiver are on 
different branch circuits 

If necessary, the user should consult the manufacturer, an authorized dealer or experienced 
radio/television technician for additional suggestion. The user may find the following booklet 
prepared by the Federal Communications Commission helpful: 

“

How to ldentify and Resolve Radio-TV Interference Problems

”

. This booklet is available from 

the U.S. Government Printing Office, 
Washington, DC 20402, Stock No. 004000003454.