Omnidirectional In-Counter Scanner
19
U
SER
’
S
M
ANUAL
Cable pin-out information for the auxiliary port is as following:
Pin Function
1
Reserved (for factory use)
2 N.C.
3
+5V output, 300mA max.
4 RTS
5 Ground
6 TX
7 RX
8 NC
9 CTS
10
Reserved (for factory use)
Handheld Data Format Requirements
Before installation, the connected handheld scanner must be configured to transmit data
format as below.
Baud rate
9600
Data bit
8
Parity None
Stop bit
1
Handshaking RTS/CTS
Message terminator
STX/ETX
Code 39 identifier code
M
ITF 2 of 5 identifier code
I
Chinese post code identifier code
H
UPC-A identifier code
A
UPC-E identifier code
E
EAN-13 identifier code
F
EAN-8 identifier code
FF
Codabar identifier code
N