3.
Insert, and tighten the screws through each of the four aligned mounting holes.
Figure 3. Z-721x
Mounting Dimensions
Getting Started
1.
Obtain a power cord (60320 C13 IEC) that is appropriate for your region and
amperage. Alternatively, this device support Power Over Ethernet.
2.
Plug-in the male end of the power cord to the wall socket.
Scanning Bar Codes
To scan bar codes:
1.
Hold a bar-coded item approximately 6 to 12 inches from the scanner's exit
window.
2.
When the scanner's proximity sensor senses the item a red LED, and laser
aiming pattern projects which enables the user to position the bar code within
its field of view.
3.
Center the printed bar code symbol within the aiming pattern, ensuring the
entire symbol is within the illuminated rectangular area formed by the pattern.
4.
Upon a successful scan, bar code data transmits to the Concierge application.
