Zebex Z-9000 Steps For Updating The Firmware Download

Page: 2 / 4

Select an empty slot to to store the file and press Enter. Please remember the slot

number you selected for later use.

The “Please Plug The USB Cable” screen appears. Connect the cradle to the

computer and plug in the power adapter; place the unit in the cradle when ready.

Please install the Z-9000 driver if necessary.

On your computer, please open the Boot Load Utility (default path: Start>All

Programs>ZEBEX>ZAC>Boot Load Utility).

Check the Device Manager on your computer for the COM port Z-9000 is using.

Summary of Contents for Z-9000

Page 1: ...he firmware of Z 9000 1 Power off the Z 9000 unit 2 Press 8 and the Power key at the same time to enter Program Manager 3 Use the up down arrow keys to select 1 Download and press Enter blue key to en...

Page 2: ...reen appears Connect the cradle to the computer and plug in the power adapter place the unit in the cradle when ready Please install the Z 9000 driver if necessary 6 On your computer please open the B...

Page 3: ...ect Load File then select the Z 9000 firmware file stored on your computer 10 Select Start Boot Load to transfer the file to Z 9000 You will hear a beep sound when the transfer is done The Download sc...

Page 4: ...file Use the up down arrow keys to select YES then press enter to begin update 13 The screen will return to the Activate screen when the update is done Upgrade Warning Incorrect operation may cause dy...