1. Press button, the alarm indicator will light up,
the display starts flickering.
2. Press button to set the hour,
press button to set the minute.
3. Press button or button to save alarm
time or just wait for another 10 seconds to confirm automatically.
Setting ALARM 2 is the same as ALARM 1.
Set
Alarm
Ring
Volume
Repeat button to adjust the alarm ring volume for your
preference.
There is 7 levels, The sequence is as follows:
03-04-05-06-07-06-05-04-03-02-01-02
........
Turn off A
larm
When alarm goes off:
1. Press button to temporarily turn off alarm for 9
minutes. Alarm will ring every next 9 minutes.
2. Press button to turn off alarm for 24 hours.
The alarm indicator or is still on, which means
alarm is still activated and will ring after 24 hours.
- 05 -
- 06 -
- 04 -
- 03 -
Chapter 4 ALARM SETTING
1
1
2
Chapter 6 USB CHARGING
Plug charging cable into device such as phone or tablet.
Device can charge both your phone or tablet at the same time.
The maximum charge current is 1 Ampere.
Chapter 7 DIMMER
Hold press button to switch DST function.
DST indicator will turn on.
Hold press button again to turn off DST function.
DST indicator will turn off.
Chapter 5 DST
ALARM 1
HOUR
MIN
ALARM 1
SNOOZE
VOLUME
SNOOZE
ALARM OFF
VOLUME
VOLUME
Chapter 9 Vibrator
DIMMER
HOUR
MINUTE
SNOOZE
ALARM 1
ALARM 2
ALARM
OFF
VOLUME
DST
TIME
12H/24H
DIMMER
Repeat button to adjust the brightness of display for
your preference.
There is 8 levels, The sequence is as follows:
04(default)-05-06-07-06-05-04-03-02-01-OFF-01-02........
When the OFF level is selected, the display will be completely turned
off and the Red Indicator light will turn on. Then if any button is
pressed again, the display screen will be restored to 04 default level
instead of complete off state, and the Red indicator light will also be
turned off.
NOTE: Hold press the DIMMER button, the display will be completely
turned off directly.
DIMMER
hold press or repeat
DIMMER
HOUR
MINUTE
SNOOZE
ALARM 1
ALARM 2
ALARM
OFF
VOLUME
DST
TIME
12H/24H
Chapter 8 RED INDICATOR LIGHT
1. When the alarm goes off
，
the Red Indicator Light will flash
2. When the brightness of dispaly is set to OFF, the Red Indicator
Light will stay on
1
Cancel Alarm
1. Hold press button to turn off alarm1 and alarm 2
permanently. And corresponding indicator and will
turn off.
2. Hold press button, just turn off
alarm 1 permanently. indicator will turn off.
3. Hold press button, just turn off
alarm 2 permanently. indicator will turn off.
4. If alarm 1 goes off, then hold press or ,
just turn off alarm1 permanently. indicator will turn off .
5. If alarm 2 goes off, then hold press or ,
just turn off alarm 2 permanently. indicator
will turn off.
2
1
2
ALARM OFF
ALARM OFF
ALARM OFF
ALARM 1
1
ALARM 2
2
ALARM 1
ALARM 2
Red Indicator Light
Insert the vibrator plug into the vibrator jack of the machine.
If you do not insert the vibrator plug into the vibrator jack of the
machine, no matter you slide the switch button to VIB or BUZZ/VIB, the
clock will have the buzz sound when alarm goes off.
A. Wake up only by bed shaker
set alarm on — toggle switch to VIB — indicator will light up.
B. Wake up only by buzzer sound
Set alarm on — toggle switch to BUZZ — indicator will light
up
C. Wake up by both Vibrator and Buzzer sound
set alarm on — toggle switch to BUZZ/VIB — and
indicator will light up.
BUZZ
BUZZ/VIB
VIB
BUZZ: Speaker will ring
BUZZ/VIB: Speaker will ring
Vibrator will vibrate
VIB: Vibrator will vibrate
