It is strictly prohibited to embed the treadmill in the fl oor to reduce access height.
This way of installation might create a highly dangerous capture area at the rear
guide pulley of the treadmill. The manufacturer expressly will undertake no liability
for injuries to any person when the treadmill is operated under such condition!
When using SYNCCam or SYNCLightCam, a distance of approx. 1.5 m
between camera and treadmill is recommended at the side of the tread-
mill, to achieve optimal video recordings.
A safety zone of at least 2 m in length and 1 m in width must
be kept free directly behind the treadmill.
No items may be left in this zone (video camera, etc.).
For setup, installation and safety related instructions of the treadmill,
please refer to the user manual of the treadmill manufacturer.
Seite 32/69
Seite 32/41
FDM-T-Sports
5 Setup and operation of the FDM-T system
5.1. Positioning of the measuring system
■
Preferably place a gymmat or other padding in the safety zone behind the treadmill to soften falls.
■
The fl oor where the device is installed must be even and horizontal.
■
The belt of the treadmill must be checked after installation, or if the treadmill is moved to another
place, and adjusted if required. (Please refer to the user manual of the treadmill manufacturer for this
purpose).