Seite 8/69
Seite 8/41
FDM-T-Sports
2.2.1. User obligations
Users are obliged to:
■
Observe all safety guidelines of the user manual.
■
Carry out any inspection and maintenance work on a regular basis as stipulated in the user manual.
■
Only use work equipment that is free of defects.
■
Check the functional safety and the proper condition of the device before operating.
■
Make all user manuals that are included in delivery and part of the measuring system accessible
to all users at all times and keep the manuals in close proximity of the measuring system.
■
Protect him-/herself, the patient or third parties against dangers.
■
Avoid a contamination through the product.
When using the system, national legal regulations must be observed, in particular:
■
The valid industrial safety regulations.
■
The valid accident prevention measures.
For the safety, reliability and performance of the components delivered by zebris, responsibility
is assumed, if:
■
Assembly, extensions, resettings, changes, or repairs were carried out through zebris or third
parties authorised by zebris, trained technicians or employees of authorised dealers. Storage
and transport are only to be affected in the original packaging delivered by the manufacturer.
■
The device is operated in accordance with the user manual.
■
The components of information technology provided by the operator correspond to the technical
requirements of hard and software included in this user manual and were installed and set up
according to the relevant descriptions in this user manual.
■
The set-up room corresponds to the given environmental conditions of the measuring system
and the valid installation regulations.
■
The FDM-T system including accessories is connected to the mains socket with a protective
grounding conductor and is operated with the correct mains voltage.
■
Exclusively the software provided by zebris as well as the components and accessory parts listed
in this user manual are used together with the system.
